If you want to feel safe, call Smart Replace.

Broward County, Florida

Impact Windows in Broward County, FL

Miami-Dade approved hurricane impact windows for homes across Broward County, measured on site, permitted in our name and installed by our professional installation team.

What impact windows do for a Florida home

An impact window is two panes of glass with an invisible layer of PVB laminated between them, set into a reinforced frame. When debris hits the glass it may crack, but the laminate and the frame hold the opening together. That is the point: a sealed opening keeps the wind out of the house, which is what protects the roof, the interior and everything you own.

Because the protection is part of the window, there is nothing to install when a storm is named. No panels to lift, nothing to store in the garage, and no change to the elevation of the house. The same glass that protects the opening in a hurricane also lowers cooling costs and cuts street noise the other 364 days of the year.

Built for the wind-borne debris region

Windows are not interchangeable across the county. The design pressure required at your address depends on where the house sits, how tall it is and how exposed the opening is. Properties east of the Intracoastal fall in the wind-borne debris region, where the requirement steps up and product approval documentation matters more than it does inland.

Every window we propose carries its approval number on the itemized proposal, either a Miami-Dade Notice of Acceptance or a Florida Product Approval. The anchor schedule and flashing detail come from that approval, and they are what the inspector checks at final and what your insurer looks for when a wind mitigation report is written.

Measurement, permits and installation

We measure every opening on site instead of working from a plan set, because Broward housing changes from block to block: 1950s block ranch homes, 1970s two-story houses and newer construction all carry different sizes. The proposal lists each window by size, product and approval number, so the scope is visible line by line.

We file the permit with your city, meet the inspector and close the permit out. Installation is a retrofit into the existing openings: the new frames are set, shimmed and anchored, stucco is patched and finished around them, and interior trim is returned to the wall. Most homes are one to three days on site once material arrives; permitting is the longer step and we give you the full timeline with the proposal.

Smart Replace Corp

  • Miami-Dade approved products
  • Permits and inspections handled
  • Free itemized estimate
  • Florida license CC 15-G-17728-X

1451 W Cypress Creek Rd #300
Fort Lauderdale, FL 33309

954-658-4298

Where we install

Installed by our professional installation team

Photographed on site in Broward County.

Crew installing a large impact window on a two-story home with a scaffolding tower at the entry
Wide three-panel impact window assembly installed along the side wall of a stucco home
Corner living space with high vaulted impact windows and a sliding glass door installed

Questions

Impact Windows: common questions

Something not answered here? Call 954-658-4298 and we will walk through it with you.

Do impact windows qualify for a wind mitigation discount in Broward County?

Often, yes. Once the openings are protected, ask your insurer for a storm mitigation application completed by an approved professional. Homeowners commonly see a reduction on the wind portion of the policy; the exact credit is set by your carrier, not by us.

Do I need a permit to replace windows in Broward County?

Yes. A window or door replacement is a permitted alteration, and the product has to be approved for the design pressure at your address. We file the application, submit the product approvals and close the inspection out for you.

Can you replace only some of the windows?

Yes. Many homeowners start with the rear elevation, the largest sliders or the bedrooms and phase the rest. We quote per opening so you can see what each phase costs, and we note on the proposal what is being left for later.

How long does the whole project take?

Installation itself is typically one to three days depending on the number and size of the openings. Permitting usually runs a few weeks with the city, and material lead times vary by product and color. You get the timeline with the proposal and updates as the permit moves.

Free estimate for your Broward County property

Itemized by opening, with the approval number listed for every unit.

Book your free estimate